View SM5004_163086.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SM5004 Series
NIPPON PRECISION CIRCUITS INC.
Quartz Crystal Oscillator IC
OVERVIEW
The SM5004 Series crystal oscillator module ICs fabricated in NPC's Molybdenum-gate CMOS. They comprise low-voltage low-current consumption oscillator circuits and output buffers. They incorporate built-in oscillation capacitance with superior frequency response to realize without any external components.
FEATURES
Oscillation frequency up to 30MHz Fundamentally oscillation 4.5 to 5.5 V supply voltage Inverter amplifier feedback resistance built-in (Rf ) Oscillation capacitances built-in (CG and CD) Output drive capability : 8 mA (VDD=4.5V) Output frequency : fo, fo/2, fo/4, fo/8 Output duty level CMOS, TTL, CMOS & TTL Input level : TTL 3 state function Chip form (CF5004xx) 6 pin SOT (SM5004xxH)
DEVICE LIST
Device SM5004A1H SM5004A3H SM5004A5H SM5004A7H SM5004B1H SM5004B3H Notes: CF5004xx is Chip form. SM5004xxH is 6 pin SOT. Output duty level CMOS CMOS CMOS, TTL CMOS, TTL TTL TTL Output frequency f0 f0/2 f0/4 f0/8 f0 f0/2 Output (standby) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation)
NIPPON PRECISION CIRCUITS-1
SM5004 Series PAD DIMENSIONS
Q XT (1000,800)
PAD COORDINATES
Name VSS VDD XT INH VDD XT Q Coordinates (m) X 150 570 850 850 850 150 Y 150 170 150 450 650 650
Y
(0,0)
VSS
X
XT
INH
Chip size : 1.00x0.80 mm Chip thickness : 250 30 m Chip reverse side : VDD level
PIN CONFIGURATION (Top view)
INH XT VSS 1 2 3 6 5 4 XT VDD Q
TERMINAL DESCRIPTIONS
Name XT XT INH VDD VSS Q Oscillator input pin Oscillator output pin Output state control input pin (with buit-in pull-up resistance) Supply voltage Ground Output pin Descriptions
NIPPON PRECISION CIRCUITS-2
SM5004 Series PACKAGE DIMENSIONS (6 pin SOT)
1.60 -0.1
+2.0
2.90.2
0.400.1 1.10.1
+0.1 0.15 -0.05
0.95 1.90.2
0 to 0.15
2.8
+2.0 -0.3
(Unit:mm)
BLOCK DIAGRAM
XT
CG Rf CD
1/2 1/2 1/2
XT
Q VDD VSS INH
NIPPON PRECISION CIRCUITS-3
SM5004 Series SPECIFICATIONS
Absolute Maximum Ratings
(VSS = 0V unless otherwise noted) Rating Unit -0.5 to 7.0 -0.5 to VDD + 0.5 -0.5 to VDD + 0.5 Chip form 6 pin SOT Power dissipation Output current Soldering temperture Soldering time PW IOUT TSLD tSLD 6 pin SOT 6 pin SOT 6 pin SOT -65 to 150 -55 to 125 250 13 255 10 V V V C C mW mA C sec
Parameter Supply voltage range Input voltage range Output voltage range Strage temperature ranges
Symbol VDD VIN VOUT TSTG
Condition
Recommended Operating Conditions
(VSS= 0V unless otherwise noted) Limit Parameter Supply Voltage Input voltage Operating temperature Symbol VDD VIN TOPR Condition MIN 4.5 VSS -20 TYP MAX 5.5 VDD +80 Unit V V C
Electrical Characteristics
(VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80C, unless otherwise noted ) Limit Parameter
HIGH-level output voltage LOW-level output voltage Output leakage current Symbol
Condition Q pin, test circuit 1, VDD= 4.5V, IOH= 8mA Q pin, test circuit 2, VDD= 4.5V, IOL= 8mA Q pin, test circuit 2, INH= Low, VDD= 5.5V INH pin INH pin INH= OPEN, test circuit 3, CL= 15pF, f= 30MHz SM5004AxH load circuit 1 SM5004BxH load circuit 2 VOH= VDD VOL= VSS
MIN 3.9
TYP 4.2 0.3
MAX 0.4 10 10
Unit V V A A V V mA mA k k pF pF
VOH VOL IZ VIH VIL IDD
HIGH-level input voltage LOW-level input voltage Current consumption
2.0 0.8 9 9 25 100 17 17 100 200 20 20 14 14 250 400 23 23
Pull-up resistance AC feedback resistance
RUP Rf CG CD
INH pin, test circuit 4 test circuit 5 Design value, determined by the internal wafer pattern.
Internal capacitance
NIPPON PRECISION CIRCUITS-4
SM5004 Series Switching Characteristics
Duty level CMOS Parameter Output rise time Output fall time Output duty cycle Output disable delay time Output enable delay time Duty level TTL Symbol tr tf DUTY tPLZ tPZL (VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80C, unless otherwise noted) Limit Condition Test circuit 6, load circuit 1, CL= 15pF 0.1VDD to 0.9VDD Test circuit 6, load circuit 1, CL= 15pF 0.9VDD to 0.1VDD Test circuit 6, Ta= 25C, VDD=5.0V load circuit 1, CL= 15pF, f= 30MHz (*1) Test circuit 6, Ta= 25C, VDD= 5.0V load circuit 1, CL= 15pF 100 100 ns ns 45 55 % 3.5 7 ns MIN TYP 3.5 MAX 7 Unit ns
(VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80 C, unless otherwise noted) Limit
Parameter Output rise time Output fall time Output duty cycle Output disable delay time Output enable delay time Note:
Symbol tr tf DUTY tPLZ tPZL
Condition Test circuit 6, load circuit 2, CL= 15pF 0.4VDD to 2.4VDD Test circuit 6, load circuit 2, CL= 15pF 2.4VDD to 0.4VDD Test circuit 6, Ta= 25C, VDD=5.0V load circuit 2, CL= 15pF, f= 30MHz (*1) Test circuit 6, Ta= 25C, VDD= 5.0V load circuit 2, CL= 15pF
MIN
TYP 2.5 2.5
MAX 7 7 55 100 100
Unit ns ns % ns ns
45
(*1) Determined by the lot monitor.
NIPPON PRECISION CIRCUITS-5
SM5004 Series TEST CIRCUITS
Test Circuit 1
3.5 VP-P, 10MHz sine wave input signal
Test Circuit 2
VDD
VDD Q Q R2 INH VSS
IOL, IZ IZ
Signal Generator
R1 C1: 0.001F R1: 50 R2: 490
C1 XT VSS
A V VOL
VOH
Q output
VOH 0V
Test Circuit 3
3.5 VP-P, 30MHz sine wave input signal
Test Circuit 4
VDD
A
VDD C1 XT R1 C1: 0.001F R1: 50 VSS
IDD
RUP= VSS Q INH
VDD IPR
Signal Generator
A
IPR
Test Circuit 5
Test Circuit 6
XT XT
VDD Rf= VSS VDD IRf
XT
VDD
R1 10k Q R2 10k CL
VSS
INH
A
IRf
Notes R1 : SM5004 3H R2 : SM5004 1H SM5004 5H SM5004 7H CL : 15pF(Including proove capacity)
Load Circuit 1
Load Circuit 2
VDD R
Q output CL
CL=15pF(Including proove capacity)
Q output CL
CL=15pF(Including proove capacity) R=800
NIPPON PRECISION CIRCUITS-6
SM5004 Series Switching Time Test Waveforms
Duty level CMOS
tr,tf DUTY
0.9VDD 0.1VDD 0.9VDD 0.1VDD DUTY measuring voltage (0.5VDD)
Q output
tr
Output duty cycle time
tf
Q output
TW T
DUTY measuring voltage (0.5VDD)
DUTY= (TW/ T) 100 (%)
Duty level TTL
tr,tf DUTY
2.4V 0.4V
Q output
2.4V 0.4V
DUTY measuring voltage (1.4V)
tr
Output duty cycle time
tf
Q output
TW T
DUTY measuring voltage (1.4V)
DUTY= (TW/ T) 100 (%)
Output Disable/Enable Delay Times INH
VIH VIL
tPLZ Q output
tPZL
INH inputwaveform tr = tf 10ns
Note : This waveform is provided by oscillating.
NIPPON PRECISION CIRCUITS-7
SM5004 Series
NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to
improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. The products described in this data sheet are not intended to use for the apparatus which influence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinafter, including compliance with export controls on the distribution or dissemination of the products. Customers shall not export, directly or indirectly, any products without first obtaining required licenses and approvals from appropriate government agencies.
NIPPON PRECISION CIRCUITS INC.
4-3, 2-chome Fukuzumi, Koto-ku Tokyo, 135 -8430, JAPAN Telephon: 03-3642-6661 Facsimile: 03-3642-6698
NC9512BE 1996 10
NIPPON PRECISION CIRCUITS INC.
NIPPON PRECISION CIRCUITS-8

▲Up To Search▲

Price & Availability of SM5004

	To Download SM5004 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .